Map the audio inputs to the
connected devices
Note
•
Before you start, ensure that the audio output of
the HDMI TV and other HDMI devices have been
connected to the audio input jacks on this Home
Theater System.
1
Press DISC .
2
Press
SETUP .
» [General Setup] menu is displayed.
3
Press .
4
Select [EasyLink Setup] , then press .
•
[One Touch Play] and [One Touch
Standby] functions are turned on by
default in the factory.
5
Select [System Audio Control] > [On] ,
then press OK to start scanning devices.
»
Once complete, audio input mapping
menu is displayed.
For example, if the TV audio is
connected to the AUX1 jack on this
Home Theater System, select [Aux1]
and map with the TV (brand name) at
the right panel.
6
Select the audio input of this Home
Theater System that is used to connect to
other HDMI device (e.g. AUX1, AUX2),
then press .
7
Select the correct connected device, then
press OK .
»
Repeat steps 5~7 to map other
connected devices.
8
Press
SETUP to exit the menu.
EN
23