Option 2: Connect to the component
video jack
1
Connect the component video cable
(not supplied) to the Y Pb Pr jacks on
this Home Theater System and the
COMPONENT VIDEO input jacks on the
TV.
•
If a progressive scan TV is used, you
may turn on the progressive scan
mode. (see 'Get started' > 'Turn on
Progressive Scan').
Note
•
The component video input jack on the TV might be
labeled as Y Pb/Cb Pr/Cr or YUV.
•
This type of connection provides good picture quality.
Option 3: Connect to the Video
(CVBS) jack
1
Connect a composite video cable to the
VIDEO jack on this Home Theater System
and the VIDEO input jack on the TV.
Note
•
The video input jack on the TV might be labeled as A/V
IN, VIDEO IN, COMPOSITE or BASEBAND.
•
This type of connection provides standard picture
quality.
EN
13