ABB PVI-3.0-TL-OUTD-S-US Product Manual page 18

• Using the mounting bracket as
a template, locate and mark the
desired mounting location.
• Using the four screws provided,
level and mount the bracket to the
surface using mounting holes B
illustrated on previous page.
• Two additional screws can be used
if necessary.
• Orient the bracket such that the
hooks in position C face outward
and upward.
• Hang the inverter on the mounted
bracket by lifting the unit up and
over the mounting plate.
• Guide the inverter and switchbox
brackets engaging the brackets
C-D and E-F on the back of the
inverter.
• Secure chassis bottom using
the machine screw and washer
provided through center hole H on
the inverter and engaging in the
bracket G.
• Add additional screws as necessary
through bottom flange securing to
mounting surface.
165mm
- 18 -
3 - Mounting and wiring
188mm
80mm