Sym JOYRIDE 300 2022 Manual page 7

 Engine oil change warning lamp:
It is used to indicate the oil exchange time, with lights, when the vehicle was driven about 1000
kilometers, indicator light will light up, warn the users to replace the oil. After finish oil change ,short press
"SET" button two times in "OIL" mode, then the indicator light will go out.
 Fuel Meter:
The pointer in this meter shows how much fuel remains in the tank.
The pointer stays in "E" position when key switch is turned to "OFF"
 Switching kilometers and miles:
In total display status ,Long press "S" and "M" button 2±0.5 seconds, The mileage value can be reset
to zero.
 Trip reset:
In TRIP display status ,Press "S" button 2±0.5 seconds ,can change the public mile display.
Mileage Setting:
Clock Setting:
Hour
Short press "M"
Minute (tens digit)
Short press "M"
Minute (units digit)
Short press "M"
Return to normal mode
Total mileage
short press "M"
Single mileage
short press "M"
Short press "S" button
Oil mileage
two times
Short press "s"
Short press "s"
Short press "s"
Long press "S" button
Voltag
e
Short press "S"
Clock
7
mileage value is removed
removed
Oil mileage value is removed
removed
Long press "M"
clock settings