Table of Contents
Advertisement
2. Disassembly
2-2.
Removing the REAR CONST
(1) Remove the 1 screw (1.7 x 6.0).
(2) Remove the 2 screws (1.7 x 6.0).
(3) Remove the screw (1.7 x 4.0).
(4) Open the BATTERY COVER and remove the screw
(1.4 x 3.0).
(5) Lift off the REAR CONST in the direction of the arrow.
[Notes]
• Raise the REAR CONST slowly because the MODE
FPC is connected to the COMPL PWB, CP-1.
• Take care not to drop the CARD COVER.
(6) Unlock the connector and disconnect the flexible
cable.
[Assembly]
Install the CARD COVER on the REAR CONST and the
BATTERY COVER on the CABI FRONT and assemble by
carrying out the disassembly procedure in reverse.
(7) Remove the BATTERY COVER.
[Notes on Assembly]
Take care with the routing of the LENS FPC.
2-2
Confidential: FUJIFILM Service Center Use Only
FinePix S5800/S800 Service Manual
1
2
7
5
3
4
6
Advertisement
Table of Contents
