FujiFilm FinePix S5800 Service Manual page 95

Confidential: FUJIFILM Service Center Use Only
FinePix S5800/S800 Service Manual
Sequemnce Item
5 Resolution check Auto mode
Focusing check LCD-ON
6 Movie/audio Movie mode
recording check LCD_ON
7 Movie/audio Playback
playback check
8 SD-card recording/ AUTO
playback check
Playback
Preparations for adjustment
Mode
(measurement points, subject, other)
(1) Use a macro resolution
chart as the subject.
(2) Set the camera to Macro
mode.
Set the flash mode to
Flash OFF mode.
(3) Set the camera up so that
the chart fills the screen
from corner to corner.
(4) Press the shutter button to
take a picture.
(1) Set the Mode dial to Movie
shooting mode.
(2) Press S1 -> S2 and then
release S2 -> S1.
(3) After 5 seconds, press and
then release S1.
(1) Set the camera to Playback
mode.
(2) Press the 4-way button
(down) to play back the
movie.
(1) Insert a SD-card and close
the card cover.
(2) Select the Mode dial
setting.
(3) Turn the camera on.
(4) If messages prompting the
user to set the language
and date are appears,
press the button specified
on the right.
(5) Press the shutter button to
take a picture.
(6) Press the playback button.
(7) Check the playback image.
5. Inspection
Method of adjustment
(VRs, waveforms, required values)
(2) Press the 4-way button
(left) and check that the
Macro icon (tulip) appears
on the LCD monitor.
Press the 4-way button
(right) and check that the
Flash OFF icon appears
on the LCD monitor.
(4) Check that the indicator
lamp lights orange
(recording in progress) and
then turns off.
(1) Check that "STANDBY"
appears on the LCD
monitor.
(2) Check that movie/audio
recording begins.
Check that "REC" appears
on the LCD monitor.
(3) Check that movie/audio
recording ends and that
the data is recorded on the
card.
(2) Check that the movie is
played back on the LCD
monitor.
Check that the sound is
played back through the
speaker.
(1) Card for recording
checking
(2) Mode: AUTO
(4) <DISP/BACK>
(5) Check that the indicator
lamp lights orange
(recording in progress) and
then turns off.
(7) Check that the last image
shot appears, regardless
of whether it is automatic
or manual.
Measuring Measurement points
equipment and jigs (VRs, positions)
ZPU0512-100
5-3