Download Print this page

Sony XAV-9500ES Operating Instructions Manual page 7

Hide thumbs Also See for XAV-9500ES:

Advertisement

Basic Operations
Switching the FM/AM Tuning
Step
Set the FM/AM tuning step of your country or
region.
1
Press HOME, touch [Settings]  [Application]
 [Radio Tuning Steps], then set the FM/AM
tuning step.
2
To exit the setup menu, touch
three times.
Using Apple CarPlay Wirelessly
When using Apple CarPlay for the first time, device
registration is required. Follow the procedure in
"Pairing with a Bluetooth® Device" (page 7).
Note
Make sure the GPS antenna (aerial) is connected. For details,
see "Installing the GPS antenna (aerial)" (page 17).
Using Android Auto
When using Android Auto wirelessly for the first
time, device registration is required. Follow the
procedure in "Pairing with a Bluetooth® Device"
(page 7).
When using Android Auto with a USB cable,
connect the Android Auto compatible Android™
phone to the unit with the USB cable.
Pairing with a Bluetooth® Device
When connecting a BLUETOOTH device for the first
time, mutual registration (called "pairing") is
required. Pairing enables this unit and other devices
to recognize each other.
When turning on the unit, the unit sends the
BLUETOOTH signal.
(back)
To pair from the settings of this unit
1
Press HOME, then touch [Settings].
If [Settings] is not set in the Favorite area, touch
[All Apps] to display the HOME2 screen, then
select [Settings].
2
Touch [Device Connection].
3
Touch [+Add New Device].
4
Operate the BLUETOOTH device according to
its message on the [Add New Device]
screen.
If a passkey input is required on the BLUETOOTH
device, input [0000].
The registered device name appears on the
[Device Connection] screen.
You can connect or disconnect the registered
device on this screen.
To pair from the BLUETOOTH device
When setting the BLUETOOTH setting of the
BLUETOOTH device to [ON], select "XAV-9500ES" on
the setting screen of your BLUETOOTH device and
then proceed to the pairing steps. Follow the
instructions on the screen of the unit.
Canceling the Demonstration
Mode
1
Press HOME, then touch [Settings].
If [Settings] is not set in the Favorite area, touch
[All Apps] to display the HOME2 screen, then
select [Settings].
2
Touch [System], then touch [Demo Mode] to
set to [Off].
3
To exit the setup menu, touch
twice.
(back)
7
GB

Advertisement

loading