Sony XAV-9500ES Operating Instructions Manual page 19

3
Route the USB Type-C extension cable 
inside the dashboard.
 Mounting the unit in the dashboard
Using the mounting brackets supplied
with your car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
Example

to dashboard/center console
Bracket
Existing parts supplied
with your car
Note
To prevent malfunction, install only with the mounting
screws .

Bracket

 Setting up the display
The mounting positions of the display can be
adjusted.
Depth Height
(within 20 mm (within 60 mm
( 13 / in), in 3 steps) (2 3 / in), in 7 steps)
16 8
Width
(within 25 mm (1 in), in 5 steps)
Adjusting the depth of the display
position
1
Loosen the 3 pre-installed screws for depth
adjustment (on top and both sides).
Pre-installed screws
Slightly loosen the screws until you can slide the
connector bracket. Do not remove the screws
from the bracket. Doing so may damage the
parts.
Angle
(-10° to +10°, in 3
steps)
19
GB