Sony XAV-9500ES Operating Instructions Manual page 18

Using the steering wheel remote
control
When using the steering wheel remote
control
Installation of the connection cable RC-SR1  is
required before use.
1
Select [Settings]  [System]  [Steering
Wheel Settings].
2
Set the [Custom] switch to [On].
You can make the registration to enable the
steering wheel remote control.
When the registration is complete, the steering
wheel remote control becomes available.
Notes on installing the connection cable
RC-SR1 
REMOTE IN

Black

Green

Brown
• Refer to the support site for details, then connect
each lead properly to the appropriate leads.
Making an improper connection may damage the
unit.
URL: https://www.sony-asia.com/support
• Consulting the dealer or an experienced
technician for help is recommended.
When using an adaptor for the steering wheel
remote control
Depending on the type of car, use an adaptor for
the steering wheel remote control (not supplied).
1
Select [Settings]  [System]  [Steering
Wheel Settings].
2
Set the [Custom] switch to [Off].
The adaptor for the steering wheel remote
control is enabled.
18
GB
Installation
To install the unit and the display securely, be sure
to follow the steps  to  in order.
 Before mounting the unit (page 18)
 Mounting the unit in the dashboard (page 19)
 Setting up the display (page 19)
 Making sure the mounting positions of the
 Attaching the display to the unit (page 22)
For your safety
After mounting the display to the unit, make sure
that the display does not interfere with normal
driving operations such as blocking the driver's
view or getting the cables tangled.
 Before mounting the unit
GND
Before mounting the unit in the dashboard, arrange
Input 1
the USB extension cables.
Input 2
1
2
display (page 22)
Connect the USB Type-C extension cable 
to the USB port.
Tighten the screw  firmly on the USB cable
holder  to secure the USB Type-C
extension cable .



