Navigation And Anchor Lights Switch Check - Yamaha AR195 2019 Owner's/Operator's Manual

1 Blower
Push the blower switch to operate the blower
and ventilate the engine compartment for at
least 4 minutes.
Navigation and anchor lights switch
check
Push the navigation and anchor lights switch
and check that the bow light and anchor light
come on.
(1) SX195/SX190: Install the anchor light.
(See page 68 for information on the an-
chor light.)
(2) Push the top of the navigation and an-
chor lights switch and check that the
bow light and anchor light come on.
1
CTSY
NAV/ANC
LIGHTS
1 Navigation and anchor lights switch
BILGE HORN
Pre-operation checks
AR195/AR190
2
1
1 Bow light
2 Anchor light
SX195/SX190
1 Bow light
2 Anchor light
(3) Push the bottom of the navigation and
anchor lights switch and check that only
the anchor light comes on.
(4) Put the navigation and anchor lights
switch in the middle position and check
that the bow light and anchor light are
off.
(5) Remove the anchor light.
2
1
1
93