Long-Term Storage; Fuel System; Lubrication; Grease Points - Yamaha AR195 2019 Owner's/Operator's Manual

Care and storage

Long-term storage

Storing your boat for prolonged periods of
time, such as winter storage, requires pre-
ventative maintenance to ensure against de-
terioration. It is advisable to have the boat
serviced by an authorized Yamaha Boat
Dealer before storage. However, the follow-
ing procedures can be performed by the
owner with a minimum of tools.

Fuel system

Fill the fuel tank with fresh fuel, adding one
ounce of Fuel Med RX, available from your
Yamaha Boat Dealer, to each gallon of fuel or
use an equivalent according to the manufac-
turer's instructions. (See page 79 for informa-
tion on filling the fuel tank.) Do not "top off"
the tank, because fuel could spill. A full fuel
tank is less likely to allow condensation to
collect in the tank, reducing the chance of
contaminated fuel. Running the engine with
treated fuel during cooling system flushing
will also help protect the fuel system.
TIP:
Use of Fuel Med RX eliminates the need to
drain the fuel system. Consult a Yamaha Boat
Dealer or other qualified mechanic if the fuel
system is to be drained instead.

Lubrication

It is advisable to take the boat to a Yamaha
Boat Dealer to have the engine fogged for
long-term storage.

Grease points

To keep moving parts sliding or rotating
smoothly, coat them with water-resistant
grease.
116
Recommended water-resistant grease:
YAMALUBE MARINE GREASE or
Yamaha Grease A
Throttle cable

Grease the throttle-cable inner wires at the
pulley wheel of the APS.
 Steering cable ball joints and inner wire
Grease the steering cable and shift cable ball
joints at the jet thrust nozzle. Extend the
steering cable and shift cable inner wires and
apply a thin coat of grease to them.
Pivot points

Grease all pivot points of the steering and
shift mechanism at the pump end.