Care And Cleaning; Cleaning The Oven; Roller Guide Care; Glass Tray Care - Vissani HVM1110W Use And Care Manual

Care and Cleaning

The oven should be cleaned regularly and any food deposits removed. Failure to maintain the oven in a clean
condition could lead to deterioration of the surface that could adversely affect the life of the appliance and possibly
result in a hazardous situation.

CLEANING THE OVEN

□
Unplug the power cord before cleaning any part of this oven.
□
Keep the inside of the oven clean. When food spatters or spilled liquids adhere to oven walls, wipe with a
damp cloth. Mild detergent may be used if the oven gets very dirty. The use of harsh detergent or abrasives is
not recommended.
□
The outside oven surface should be cleaned with soap and water, rinsed and dried with a soft cloth. To prevent
damage to the operating parts inside the oven, water should not be allowed to seep into the ventilation
openings.
□
Do not place any object between the oven front face and the door or allow residue to accumulate on sealing
surfaces. Wipe the sealing area frequently with a mild detergent, rinse and dry. Never use abrasive powders
or pads.
□
If the Control Panel becomes wet, clean with a soft, dry cloth. Do not use harsh detergents or abrasives on
Control Panel.
□
If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth. This may occur
when the microwave oven is operated under high humidity conditions and in no way indicates malfunction of
the unit.
□
It is occasionally necessary to remove the glass tray for cleaning. Wash the tray in warm sudsy water or in a
dishwasher.
□
The roller guide and oven cavity floor should be cleaned regularly to avoid excessive noise. Simply wipe the
bottom surface of the oven with mild detergent water or window cleaner and dry.
□
When opened, the door must not be subjected to strain, for example, a child hanging on an opened door or
any load could cause the oven to fall forward to cause injury and also damage to the door. Do not operate the
oven if it is damaged, until it has been repaired by a competent service technician. It is particularly important
that the oven closes properly and that there is no damage to the door (bent), hinges and hooks (broken or
loosened), or door seals and sealing surfaces.

ROLLER GUIDE CARE

□
Clean the roller guide and oven floor frequently to prevent excessive noise.
□
Always use the roller guide for cooking together with the glass tray.

GLASS TRAY CARE

□
Never operate the oven without the glass tray in place.
□
Do not use any other glass tray with this oven.
□
If the glass tray is hot, allow it to cool before placing in water or cleaning.
□
Do not cook directly on the glass tray.
18