Vissani HVM1110W Use And Care Manual page 9

Using the Oven Controls (continued)
5
Using the Clock
This is a standard 12-hour clock (1:00-12:59). If the
clock is not set, "0:00" will remain in the display. When
the clock is set, the ":" will flash. During cooking, the
clock may be seen for 3 seconds by touching CLOCK.
□
Ensure the microwave is in standby mode.
□
Touch CLOCK. "00:00" will appear in the
display, with the first "0" flashing.
□
Use the numbered keypad to enter the time
and press CLOCK again.
7
Using the Control Lock
□
The Control Lock shuts down the control panel
pads to avoid unintended use of the microwave
oven. To Lock/Unlock Control: The microwave
oven must be in standby mode. Touch and hold
STOP/CANCEL for 3 seconds until one long
tone sounds and the display clears to show an
outline of the display area.
□
Repeat to unlock control, and return the
display to the time of day. If any pad is touched
while the control is locked, there will be no
response from the microwave oven.
6
Using the Kitchen Timer
The Kitchen Timer can be set in minutes and seconds,
up to 99 minutes, 99 seconds, and counts down the
set time. The Kitchen Timer may not be used while any
other function is operating. The Kitchen Timer does not
start or stop the microwave oven.
□
Touch TIMER. "00:00" will appear in the
display, with the first "0" flashing.
□
Enter desired time in minutes and seconds,
filling all four digits from left to right. Example:
1-0-0-0 for 10 minutes, or 0-5-0-0 for 5
minutes.
□
Touch START/+30Sec. When the set time ends,
end-of-timer tones will sound, and the display
will return to the time of day.
□
Touch STOP/CANCEL at any time to cancel the
timer.
8
Listening to Tones
Tones are audible signals that indicate the following:
One tone
□
Valid entry (short tone)
□
End of stage in multistage cooking
□
Control lock activated or deactivated (long
tone)
Five tones
□
End of cycle
□
End of Kitchen Timer countdown
9
Please contact 1-855-847-7264 for further assistance.
HOMEDEPOT.COM