Garnet SeeLevel 710-JS Manual page 9

WIRING THE SENDER
❸
Connect the wiring to the pigtail
The following diagram shows the wiring from the sender to the display pigtail. Other wiring
connections may apply for each display model. All wiring diagrams are available on the website.
TO PUMP
INDICATOR
+12V POWER
W
CAUTION: Wires are to be routed to the RIGHT
side of the sender, away from the sender. Never
route the wires to the left of the sender. If they
drape over the sender they could affect the reading.
SeeLeveL Sender Installation Manual 710-JS / 710-ES / 710-SS
TO
GROUND
GALLEY
W
CAUTION: It is very important that the display
and senders have the same ground. Make sure the
sender ground connection is connected back to the
display ground or breaker panel ground.
BLACK GREY
PIGTAIL
HARNESS
Example of stacked
sender wiring
FRESH STACKED Page 9