Garnet SeeLevel 710-JS Manual page 6

PROGRAMMING THE SENDERS 710-ES AND 710-SS
Senders tabs to cut for single sender or bottom sender if double-stacked.
No Tabs cut
FRESH
For a double-stacked tank configuration, the top sender requires an additional tab to be cut.
TOP
FRESH TOP
Examples for correcting cuts made in error.
(GRY or BLK tab cut by mistake)
GRY TOP BLK
FRESH TOP
SeeLeveL Sender Installation Manual 710-JS / 710-ES / 710-SS
GRY
GREY BLACK
GRY TOP
GREY TOP BLACK TOP
(BLK tab cut by mistake)
BLK
GREY SINGLE
OR BOTTOM
BLK
W
NOTE: For systems that have a
Galley button. Cut the GRY and the TOP
tabs. The GALLEY and the GREY tanks can
only have one sender, so no programming
is possible for the number of senders.
TOP BLK
(TOP tab cut by mistake)
TOP
FRESH SINGLE
OR BOTTOM
GRY
GALLEY
W
CAUTION: TABS CUT IN ERROR
If the "GRY" tab has been removed and it should be a black
tank sender, or if the "BLK" tab has been removed and it should
be a grey tank sender, then cut out the recessed grey-black
correction tab that says "GBC" next to it. This reverses the effect
of the grey and black tabs.
If either the "GRY" or "BLK" tabs have been removed and it
should be for a fresh tank, then remove the other "GRY" or
"BLK" tab. When both the "GRY" and "BLK" tabs are removed, it
becomes a fresh tank sender.
TOP
Page 6