Content Operation Instructions...1 Safety Precautions...2 First Setup...3 Front View of the Product ...4 Rear View of the Product ...5 Installation...6 Basic Operation...9 Advanced Operation—OSD Menu... 11 Supporting Timing Modes ... 14 Technical Information ... 15 Wall-mount instruction ... 16 Care and Maintenance... 17 Troubleshooting...
FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This TFT LCD Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation.
This TFT LCD Monitor should be operated only at the correct power sources indicated on the label on the rear end of the TFT LCD Monitor. If you’re unsure of the power supply in your residence, consult your local dealer or power company.
Uninstall the stand base 1. Lay the TFT LCD Monitor flat on a table with the LCD screen face down. To prevent the TFT LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set.
Front View of the Product ① OSD Turn On/ Off ② Volume Down/ Scroll Down/ Adjust Decrease ③ Volume Up/ Scroll UP/ Adjust Increase ④ Input select/ Confirm Selection ⑤ Power On/ Off and LED Indicator Note: ▲/▼ button will be performed as volume down/ up control when OSD menu is disabled.
Installation Connecting to DVD/ Set Top Box/ Camera and Channel Digital Video Recorder Connect Video/ Audio cables from compatible devices into the back panel of TFT LCD Monitor. 1) With RCA A/V cable: Single TFT LCD Monitor / Camera BNC Coaxial Cable (not supplied)
VGA (15pin D-Sub): Connect the VGA cable from VGA output of the computer to the VGA terminal input of your TFT LCD Monitor. Also, connect the green end of the Audio In cable from the audio output of your computer to the audio input terminal (red/white) of the TFT LCD Monitor.
Page 10
Connecting with the Power Cord Connect the power cord to the power cord connector on the back of your TFT LCD Monitor, and plug the other end of the power cord into a correctly grounded electrical outlet. AC power socket...
Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the TFT LCD Monitor on/off: Press POWER button on the front of TFT LCD Monitor. The power LED indicator lights blue when the TFT LCD Monitor is on. Selecting input source Press the 2 button on the front panel, and use ▲▼...
Page 12
Press and hold the ▲ button and then the button for 3 seconds to lock all 5 buttons. The TFT LCD Monitor will show an “Lock Out” message for 5~10 seconds and the message will disappear automatically. Repeat this step to unlock.
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your TFT LCD Monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Picture Menu —To adjust the picture quality...
Fresh Tone: To adjust picture fresh tone. Color Temp.: To select Color Temperature from Normal, Cool, and Warm with ▲▼. Auto Adjust: To auto adjust picture’s horizontal position, vertical position, fine tune and H-Size. H-Position: To adjust the horizontal position of the picture. V- Position: To adjust the vertical position of the picture.
Option Menu —To adjust OSD setting Source: To select the input source between PC, AV, S-VIDEO with ▲▼. OSD Language: To select the OSD language between English, French, German, Spanish, Italian, Portuguese, Dutch, Swedish with ▲▼. OSD H- Position: To adjust the OSD horizontal position with ▲▼. OSD V- Position: To adjust the OSD vertical position with ▲▼.
VESA VESA VESA Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates. Doing so may result in permanent damage to your TFT LCD Monitor. RESOLUTION 640x480 @ 60Hz 720x400 @ 70Hz 640x480 @ 72Hz...
Technical Information LCD Panel Power Management Displayable Resolution Pixel Dimension LCD Display Color Tilt Active Display Area Temperature Compliance Power Speaker 19” TFT DPMS compatible On: 45 Watts (maximum) Off: < 1 Watt SXGA 1280 x 1024 max. Vertical Frequency 75Hz max. 0.294 x 0.294 mm 16.7M 0°...
Follow these steps to finish installing the wall mounting arm: 1. Place the wall mounting arm onto the back of the TFT LCD Monitor. Line up the holes of the arm with the holes in the back of the monitor.
Never remove the rear cover of your TFT LCD Monitor cabinet. The display unit inside contains high-voltage parts and may cause electric shock to human bodies. Never try to repair your TFT LCD Monitor yourself. Always call your service center or a qualified technician to fix it.
Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/product_registration.html...