Advertisement
Si071562E
6. Fan Motor / Fan Rotor
Warning
Step
1. Remove the chamber
cover.
1
Remove the 4 screws.
2
Remove the chamber
cover.
2. Remove the fan housings.
1
Press the 2 hooks at
the fan housing lower
part to unfasten them.
2
Open the fan housing
and pull the fan housing
lower part forward to
remove it.
3
Remove the other fan
housing lower parts in
the same way.
Removal Procedure
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Bottom side
Chamber cover
Rear side
Hook
Fan housing lower part
Fan Motor / Fan Rotor
Points
You can remove the fan
rotor and fan motor without
removing the drain pan.
(R22714)
There is no hook around
chamber cover, be careful
not to drop it.
(R22715)
The number of the fan rotor
varies depending on the
model.
(R22716)
When reassembling, make
sure the hooks of fan
housings are securely
fastened.
Hook
(R22717)
(R22718)
13
Advertisement
