Advertisement
Si071562E
Step
2. Remove the indoor heat
exchanger thermistor.
1
Cut the clamp.
2
Pull out the earth /
ground connector.
3
Remove the 4 screws
and remove the indoor
heat exchanger
supporting plate.
Removal Procedure
Procedure
Bottom side
Clamp
(R22701)
Earth / ground
connector
(R22702)
To prevent the indoor heat
exchanger from dropping, be
sure to support it while you
remove the screws.
There is no hook around the
indoor heat exchanger
supporting plate, be careful
not to drop it.
Indoor heat
exchanger
supporting plate
(R22703)
Indoor Heat Exchanger
Points
9
Advertisement
