Table of Contents
Advertisement
Problem
Still images cannot be recorded.
Picture is too bright.
Cause
The DP2-TWAIN or cellSens /
OLYMPUS Stream is processing
recording.
The cellSens / OLYMPUS Stream is
processing file save, etc.
The computer memory is insufficient.
Exposure correction is set in the +
direction.
The metering area is set to a dark
area outside the region of interest.
AE lock, which was set when the
exposure time was longer than the
currently required exposure time, is
active.
The input highlight level adjustment is
too low.
The microscope illumination is too
bright.
Remedy
Wait until the recording processing
completes before starting recording
of the next image. In certain cases, it
may be required to press the Cancel
button on the status bar and record
the image again.
Wait until processing completes before
starting recording of the next image.
Exit from other software before retrying
recording.
Save the images which you did not
save.
Set the desired exposure correction
value.
Move the metering area to the area
where you want to obtain optimum
exposure.
Cancel AE lock.
Reset the current level adjustment and
adjust the optimum level again.
Reduce the microscope illumination
intensity or engage an ND filter to
reduce brightness.
DP26
Page
–
–
–
–
–
–
–
–
26
Advertisement
Table of Contents
