Olympus DP26 Instructions Manual page 20

Microscope digital camera
Hide thumbs Also See for DP26:
Table of Contents

Advertisement

Field number
22
17
} If the acquired field is as shown in left figure, use a camera
0.63x
(FN 17)
1x
(FN 10.7)
} The view field range illustrated in left figure is a guide. Check the
CAUTION
a
adapter having magnification of 0.5 x to 1 x. (If a 0.35 x camera
adapter is used, the peripheral part of the image will be
obscured.) If a C-mount camera adapter from other manufacturer
than Olympus is used, the optical performance of the system may
not be manifested fully.
actual view field range by observing the specimen equipped with
a scaling function, etc. before use.
• Be careful in using other manufacturer's C-mount camera
adapter or C-mount lens having a thread length
mm. Otherwise, the threaded section will hit the inside of the
camera head and cause damage to it.
• Be sure to adjust the parfocality between the C-mount camera
adapter and the eyepieces. Otherwise, the image through the
camera and the image through the eyepieces are not parfocal.
For the parfocality adjustment method, refer to the instruc-
tion manual for the camera adapter in use.
a
over 4.5

Advertisement

Table of Contents
loading

Table of Contents