Baxton Studio BBT 8054-SF Assembly Instructions Manual

MODEL : BBT 8054 - SF
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS
: 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
STEP 1
1.1 Open the zip at the bottom of cushion seat and take out leg.
ASSEMBLY INSTRUCTIONS
B
C
A
PART LIST
QTY
ITEM DESCRIPTION
A
CHAIR 1 PC
B 2 PCS
LEG FRONT
C
LEG BACK 2 PCS
STEP 2
B
C
HARDWARE LIST
ITEM DESCRIPTION
1 JCBB Bolt M8 x 45mm
2 M8 FLAT WASHER
3 M8 SPRING WASHER
M5 ALLEN KEY (BALL SHAPE)
4
TOP VIEW
TOP VIEW
1 OF 2
QTY
8 PCS
8 PCS
8 PCS
1 PC