LEGRAND Wattstopper LMSW-610-S Installation Instructions Manual page 6

Loads in fully wireless rooms will automatically bind to LMSW-6xx-S switches based on the behavior detailed for each switch below.
NOTE: Wired loads in hybrid rooms will have no automatic PnG binding and must be configured with LMCS-100. However, after
a switch is paired into the room, the configuration button can be pressed once to toggle loads in the room in order to verify
communication and operation.
LMSW-610-S
Ideal Application:
• Single-zone
• Single scene recall
• Toggle control
LMSW-611-S
Ideal Application:
• Single-zone, with dimming
• Toggle and up/down control
LMSW-622-S
Ideal Application:
• Dual-zone, with dimming
• Toggle and up/down control for
both zones
* Toggle Ramp – Button press actions will toggle loads between minimum and maximum values. Press-and-hold actions will dim or ramp
loads. The first time you press and hold the button, the light level will raise gradually, stopping when you release the button (just like a
rocker). Each subsequent time you hold the button it will reverse the ramp direction from the previous hold.
LMSW-641-S
Ideal Application:
• Single or multiple zones
• -Toggle and up/down control
PLUG N' GO OPERATION (PNG)
Input
Button
Input
Button
Rocker Up
Rocker Down
Input
Button 1
Rocker 1 Up
Rocker1 Down
Button 2
Rocker 2 Up
Rocker 2 Down
Input
Button 1
Button 2
Button 3
Button 4
Rocker Up
Rocker Down
** Adjust lights to desired level using rockers. Then hold button for 5 seconds to
save the scene.
6
Wireless PnG Binding
All Lighting Loads Toggle On/Off
Wireless PnG Binding
All Lighting Loads Toggle On/Off
All Lighting Loads Send to 100%
All Lighting Loads Send to Off
Wireless PnG Binding
All Lighting Loads Toggle On/Off
All Lighting Loads Send to 100%
All Lighting Loads Send to Off
All Lighting Loads Toggle On/Off
All Lighting Loads Send to 100%
All Lighting Loads Send to Off
Wireless PnG Binding
All Lighting Loads Send to 100%
All Lighting Loads Send to 75%
All Lighting Loads Send to 50%
All Lighting Loads Send to 25%
All Lighting Loads Send to 100%
All Lighting Loads Send to Off
Default Press Default Hold
Toggle Ramp*
Default Press Default Hold
Toggle Ramp*
Raise
Lower
Default Press Default Hold
Toggle Ramp*
Raise
Lower
Toggle Ramp
Raise
Lower
Default Press Default Hold
Save Scene**
Save Scene
Save Scene
Save Scene
Raise
Lower