Kramer PT-871 Quick Start Manual

PT-871, PT-872 Quick Start Guide
This guide helps you install and use your PT-871, PT-872 for the first time.
Go to
firmware upgrades are available.
Scan for full manual
Step 1: Check what's in the box
PT-871, PT-872 HDMI 4K Line Transmitter/Receiver
1 Power supply (12V DC)
Step 2: Get to know your PT-871, PT-872
# Feature
IN
LED Indicators OUT
ON
HDMI IN Connector (PT-871)
HDMI OUT Connector (PT-872)
DGKat-2.0 OUT RJ-45 Connector (PT-871)
DGKat-2.0 IN RJ-45 Connector (PT-872)
12V DC Connector
Step 3: Install the PT-871, PT-872
Install PT-871, PT-872 using one of the following methods:

Attach the rubber feet and place the unit on a flat surface.

Fasten a bracket (included) on each side of the unit and attach it to a flat surface.
For more information go to

Mount the unit in a rack using an optional RK-4PT rack adapter.
PT-871, PT-872 Quick Start (P/N: 2900-300940QS REV 4)
www.kramerav.com/downloads/PT-871, PT-872
Function
Lights when an active source is connected to HDMI IN on the PT-871.
Lights when an active acceptor is connected to HDMI OUT on the PT-872.
Lights when power is connected to the device.
Connects to an HDMI source .
Connects to an HDMI acceptor.
Connects to the DGKat-2.0 IN connector on the PT-872 using twisted pair cable.
Connects to the DGKat-2.0 OUT connector on the PT-871 using twisted pair cable.
Connects to the unit's power supply.
www.kramerav.com/downloads/PT-871,
to download the latest user manual and check if
4 Rubber feet (per unit)
1 Quick start guide
PT-872.
P/N:
2 9 0 0 - 3 0 0 9 4 0 Q S
1 Bracket set (per unit)
Rev:
4