Step 19
19.1
⑯
⑲
⑰
19.
19.1) Drill two holes on wall at same height as Metal Brackets(⑱)
on Sideboard with Power Drill(⑰).
You can mark these points in two ways as below:
1) Move the Sideboard back to the wall. Mark two points same
height as Sideboard on the wall.
Note: The Metal Brackets need to be secured to solid, load
bearing surface. Please use a Stud Finder(not supplied) if needed
to locate the Wall Frame.
2) Measure the height of the Metal Brackets(⑱) with
ruler/measuring tape and mark on wall to keep them accurate and
same height.
19.2) Insert Wall Plugs(⑲) into drilled holes on wall with
Hammer(⑯).
Page 16 OF 19
Noble House Home Furnishings LLC