Pulse - Toshiba IK-TF2 Instruction Manual

* * * * 3* * * * 2PULSE

Accumulation of charges is started and ended through the trigger pulse input to the RGB terminal, the
vertical sync signal is reset and field images are output.
Trigger pulse level
*RGB terminal*
Trigger pulse fetch timing
*When the trigger pulse fetch timing is set to pulse width
Trigger pulse width
Trigger pulse interval
*When the trigger pulse fetch timing is set to rising edge or falling edge
Trigger pulse width
Trigger pulse interval
* (Low Level)*Less than 0.5V , (High Level)*3.4V to 5V
* Rising edge / Falling edge / Pulse width selectable
* More than 16.7ms(FLD/FRM setting*FLD)
More than 33.4ms(FLD/FRM setting*FRM)
* More than 16.7ms(FLD/FRM setting*FLD)
More than 33.4ms(FLD/FRM setting*FRM)
* More than 2 s
* More than 16.7ms(FLD/FRM setting*FLD)
More than 33.4ms(FLD/FRM setting*FRM)
- 28 -