Pulse Sr (1 Pulse Sync Reset) - Toshiba IK-TF2 Instruction Manual

* * * * 2* * * * 1 PULSE SR* * * * 1 Pulse Sync Reset* * * *
Charge begins to accumulate after the trigger input to the RGB terminal, the vertical sync signal is reset and
field images are output.
(a) Rising edge / Falling edge mode
The exposure time is set to 0.02 ms to 16 ms on the menu.
Trigger pulse level
*RGB terminal*
Trigger pulse fetch timing
Trigger pulse width
Trigger pulse interval
TRIGGER
(RGB terminal)
VD output
Index output
' INDEX '
Video output
(b) Width mode
Trigger pulse width
Trigger pulse interval
Exposure start
TRIGGER
(RGB terminal)
VD output
Index output
'INDEX'
Video output
* (Low Level)*Less than 0.5V , (High Level)*3.4V to 5V
* Rising edge / Falling edge selectable
* More than 2 s
* More than 33.5 ms
Approx. 1.9 s
Exposure period
Exposure end
11 to 12H
* More than 4 s Less than 255FRM
* 17.5ms (From exposure end to next exposure start.)
Exposure end
Approx. 1.9 s
Exposure period
Approx. 1.9 s
11 to 12H
Exposure end
Falling edge mode
Rising edge mode
Negative
Positive
- 27 -