Setting To Factory Setting Status; External Sync; External Sync Signal Input Conditions; External Sync Frequency Range - Toshiba IK-TF2 Instruction Manual

3 ccd camera
Table of Contents

Advertisement

* * * * 7* * * * Setting to factory setting status

The contents set of each scene file can be returned to the factory default status (preset status).
(1) If characters are displayed on the screen, press the [DISP] button to disable the character display.
(2) Push [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second.
(3) The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed
for approx. 1 second.

7' ' ' ' 3 External Sync

When using the unit with an external sync signal, input HD and VD to RGB terminal on the rear panel, or
input SYNC to RGB terminal. When the external sync signal is input, the camera automatically switches its
sync from the internal sync to the external sync.
The operation is as shown below, depending on the unit's status and how external sync signals are input.
Unit's status
Shutter mode*EXT TRIG
EXT TRIG*1PULSE SR
or 2PULSE
Others

* * * * 1* * * * External sync signal input conditions

HD
VD

* * * * 2* * * * External sync frequency range

(External sync with HD, VD)
For EIA standard frequency *Within

* * * * 3* * * * Using the unit with external sync signal

When adjusting H (horizontal) phase refer to the item "7.2 (5)(5.1) Adjusting horizontal phase".
* * * * 3* * * * 1* * * * H (horizontal) phase adjustment
Observe the external sync signal and the video signal output
waveform of the unit with a dual trace oscilloscope, and adjust
H phase so that the H phases match.
HD / SYNC input
Off
HD
SYNC
Off
HD
SYNC
Off
SYNC
* 2 to 5V*p-p*
Negative
* 2 to 5V*p-p*
Negative
1% (at horizontal sync frequency)
VD input
*
*
*
Off
On
Off
On
On
Match
the phase.
- 23 -
Operation
Internal sync
External sync with HD
(Only for H sync with HD)
External sync with SYNC
(H sync with HSYNC)
Internal sync
External sync with HD, VD
(H V sync with HD, VD)
External sync with SYNC
(H V sync with H SYNC, V SYNC)
External sync with VD
(Only for VD reset)
Prohibited
*
*Don't care*
External
Sync. signal
Camera
Video output

Advertisement

Table of Contents
loading

Table of Contents