Table of Contents
Advertisement
7' ' ' ' 5 EXT TRIG (External trigger)
Charge begins to accumulate after the trigger input, and 1 field or 1 frame images are output. There are
three modes: 1PULSE SNR, 1PULSE SR and 2PULSE.
The RGB terminal trigger input and index output interface are as shown below.
*
* * * * 1* * * * 1 PULSE SNR* * * * 1 Pulse Sync Non Reset* * * *
Charge begins to accumulate after the trigger input to the RGB terminal, and 1 field images are output.
(a) Rising edge / Falling edge mode
The exposure time is set to 0.02 ms to 16 ms on the menu.
Trigger pulse level
*RGB terminal*
Trigger pulse fetch timing
Trigger pulse width
Trigger pulse interval
TRIGGER
(RGB terminal)
VD output
Index output
'INDEX'
Video output
* Image output after 1 V
Trigger input
* (Low Level)*Less than 0.5V , (High Level)*3.4V to 5V
* Rising edge / Falling edge selectable
* More than 2 s
* More than 50ms
Approx. 1.9 s
Exposure period
(Trigger pulse doesn't
pass the VD falling.)
A image is output at the first field
after the end of the exposure.
* CMOS out *
Approx. 1.9 s
Exposure period
* Image output after 2 V
(Trigger pulse pass the
VD falling.)
- 25 -
INDEX out
Falling edge mode
Rising edge mode
Approx. 1.9 s
Exposure period
* Image output after 2 V
(Trigger pulse pass the
VD falling.)
Advertisement
Table of Contents
