Table of Contents
Advertisement
Quick Links
3 CCD CAMERA
IK-TF7
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
USER-INSTALLER CAUTION: Your authority to operate this FCC verified equipment could be voided if
you make changes or modifications not expressly approved by the party responsible for compliance to
Part 15 of the FCC Rules.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est comforme à la norme NMB-003 du Canada.
IK-TF7(E)
Page 1
INSTRUCTION MANUAL
For Customer Use
Enter below the Serial No.
w h i c h i s l o c a t e d o n t h e
bottom of the cabinet. Retain
this information for future ref-
erence.
Model No.: IK-TF7
Serial No.:
2004.03.24, 0:58 PM
Adobe PageMaker 6.5J/PPC
Advertisement
Table of Contents
Related Manuals for Toshiba IK-TF7
Summary of Contents for Toshiba IK-TF7
-
Page 1: Instruction Manual
Retain this information for future ref- erence. Model No.: IK-TF7 Serial No.: 2004.03.24, 0:58 PM Adobe PageMaker 6.5J/PPC... - Page 2 Drop and/or fail of the product may cause injury. • Do not touch the power cord or other connection cables during a thunderstorm. This might cause electric shock. IK-TF7(E) Page 2 Graphic symbol definitions Symbol “ ” indicates a prohibited action that must not be carried out.
- Page 3 5. Repairs or modifications made by the user or caused to be made by the user and carried out by an unauthorized third party. 6. Notwithstanding the foregoing, Toshiba’s liabilities shall not, in any circumstances, exceed the purchase price of the product.
-
Page 4: Table Of Contents
( 6 ) OPTION ... 21 (6. 1) Changing RS232C communication baud rate ... 21 ( 7 ) Setting to factory setting status ... 22 IK-TF7(E) Page 4 7. 3 External Sync ... 22 ( 1 ) External sync signal input conditions ... 22 ( 2 ) External sync frequency range ... -
Page 5: Cautions On Use And Installation
This is not a malfunction. 2. COMPONENTS (1) Camera ... 1 (2) Accessories (a) Instruction manual ... 1 IK-TF7(E) Page 5 • Handling of the protection cap. Keep the protection cap away from children. Chil- dren may put them into mouth or swallow them accidentally. -
Page 6: Items Controlled By Using On Screen Display
Manual shading -128~0~127 correction H phase adjustment -100~0~100 RGB SYNC G ON, ALL ON, ALL OFF Baud rate 9600 bps, 19200 bps IK-TF7(E) Page 6 Available selectins 2004.03.24, 0:59 PM Preset value (Factory setting) MANU 1P SNR 16 ms 3200K... -
Page 7: Names And Functions
Used as the connector terminal for RGB output, and SYNC output. HD and VD signals are input/output. When the random trigger operation is used, the trigger signal is input and the index signal is output. This terminal also includes an RS232C format control. IK-TF7(E) Page 7 (AWB) DISP... -
Page 8: Connection
5. CONNECTION 5. 1 Standard Connection Lens IK-TF7 Less than 4 mm 5. 2 Cautions on Connection • When connecting the camera cables, be sure to turn off the camera and the other equipment connected. • We suggest using a C mount lens made for a 3CCD camera. -
Page 9: Operation
If the C.TEMP is set to 3200K, set to 5600K. If the message appears with the C.TEMP set to 5600K, change the illumination or use the color temperature conversion filter. IK-TF7(E) Page 9 (Manual White Balance) Adjust the white balance manually using the WHT BAL menu while shooting the white object. -
Page 10: Gain
2 OFF The status is no shading correction. * The shading correction is effective when the lens iris or zoom ratio is fixed. Use the unit with SHAD. OFF for variable lens conditions. IK-TF7(E) Page 10 Meaning 2004.03.24, 0:59 PM... -
Page 11: Mode Setting By On Screen Display
MANU PAGE MANU PAGE E. TRG 1P SR E. TRG 1P SNR E. TRG PW SR E. TRG PW SNR E. TRG IK-TF7(E) Page 11 DISP DISP Menues WHT BAL PROCESS SHAD. PAGE PAGE MANU SHAD. MANU 2004.03.24, 0:59 PM... -
Page 12: Menus
(b) Partial scanning setting 1 Set the " " to PART by pushing [MENU UP], [MENU DOWN] buttons. 2 Select either OFF or 60fps, 90fps by pushing [DATA UP], [DATA DOWN] buttons. IK-TF7(E) Page 12 • Shutter mode MANU, SS, E.TRG •... -
Page 13: (1. 2) Changing Each Setting In Ss (Synchro. Scan) Mode
2 Select either OFF or 60fps, 90fps by pushing [DATA UP], [DATA DOWN] buttons. Note: The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc. IK-TF7(E) Page 13 • Shutter mode MANU, SS, E.TRG • Synchro. scanning setting... -
Page 14: (1. 3) Changing Each Setting In E.trg Mode
(c) Changing the partial scanning setting 1 Set the " " to PART by pushing [MENU UP], [MENU DOWN] buttons. 2 Select either OFF or 60fps, 90fps by pushing [DATA UP], [DATA DOWN] buttons. IK-TF7(E) Page 14 • Shutter mode MANU, SS, E.TRG •... -
Page 15: (1. 3. 2) Changing Each Setting In 1P Sr Mode
(c) Changing the partial scanning setting 1 Set the " " to PART by pushing [MENU UP], [MENU DOWN] buttons. 2 Select either OFF or 60fps, 90fps by pushing [DATA UP], [DATA DOWN] buttons. IK-TF7(E) Page 15 • Shutter mode MANU, SS, E.TRG •... -
Page 16: (1. 3. 3) Changing Each Setting In
2 Select either OFF or 60fps, 90fps by pushing [DATA UP], [DATA DOWN] buttons. Note: The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc. IK-TF7(E) Page 16 • Shutter mode MANU, SS, E.TRG • E.TRG mode 1P SNR, 1P SR, PW SNR, PW SR, RR •... -
Page 17: (1. 3. 4) Changing Each Setting In
[DATA UP], [DATA DOWN] buttons. Note: The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc. IK-TF7(E) Page 17 • Shutter mode MANU, SS, E.TRG • E.TRG mode 1P SNR, 1P SR, PW SNR, PW SR, RR •... -
Page 18: (1. 3. 5) Changing Each Setting In
(a) Changing the gain in MANU mode 1 Set the " " to MANU by pushing [MENU UP], [MENU DOWN] buttons. 2 Set the manual gain by pushing [DATA UP], [DATA DOWN] buttons. IK-TF7(E) Page 18 • Shutter mode MANU, SS, E.TRG •... -
Page 19: ( 3 ) Wht Bal (White Balance)
(b) Changing the blue gain 1 Set the " " to B GAIN by pushing [MENU UP], [MENU DOWN] buttons. 2 Set the blue gain by pushing [DATA UP], [DATA DOWN] buttons. IK-TF7(E) Page 19 • White balance mode setting (AWB, MANU) •... -
Page 20: 4 ) Process
(4. 6) Changing manual shading correction 1 Set the " " to MANU by pushing [MENU UP], [MENU DOWN] buttons. 2 Set the MANUAL SHADING by pushing [DATA UP], [DATA DOWN] buttons. IK-TF7(E) Page 20 • Master pedestal adjustment -64 to 64 •... -
Page 21: 5 ) Sync
(6. 1) Changing RS232C communication baud rate 1 Set the " " to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons. 2 Select either 9600 or 19200 by pushing [DATA UP], [DATA DOWN] buttons. IK-TF7(E) Page 21 • Sync system display •... -
Page 22: 7 ) Setting To Factory Setting Status
HD: 2 to 5V(p-p) Negative VD: 2 to 5V(p-p) Negative ( 2 ) External sync frequency range (External sync with HD, VD) Within 1% (at horizontal sync frequency of 23.229 kHz) IK-TF7(E) Page 22 VD input Note Internal sync mode External sync mode Only V reset is applied due to VD input. -
Page 23: 3 ) Using The Unit With External Sync Signal
The video signal stored during the frame period set is output as 1 frame video image at a frame interval specified. VD output Video putput Index output (INDEX) IK-TF7(E) Page 23 Match the phase. HD/VD OUTPUT HD/VD INPUT high-impedance HD/VD INPUT 75 (factory setting) (4FRM setting) 2004.03.24, 0:59 PM... -
Page 24: Ext Trig (External Trigger)
The video and the VIDEO INDEX have a paired relationship. Note: When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video. IK-TF7(E) Page 24 (CMOS out) Trigger input... -
Page 25: (1. 2) 1 Pulse Trigger Sync-Non Reset Picture Output Timing (At Time Of Internal Sync)
The video and the VIDEO INDEX have a paired relationship. Note: When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video. IK-TF7(E) Page 25 About 1 s Exposure period*... -
Page 26: ( 2 ) 1P Sr (1 Pulse Sync Reset)
Note: When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video. IK-TF7(E) Page 26 About 1 s Exposure period*... -
Page 27: ( 3 ) Pw Snr (Pulse Width Trigger Sync-Non Reset)
The video and the VIDEO INDEX have a paired relationship. Note: When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video. IK-TF7(E) Page 27 About 7 s Exposure period*... -
Page 28: (3. 2) Pulse Width Trigger Sync-Non Reset Picture Output Timing (At Time Of Internal Sync)
The video and the VIDEO INDEX have a paired relationship. Note: When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video. IK-TF7(E) Page 28 About 7 s Exposure period*... -
Page 29: ( 4 ) Pw Sr (Pulse Width Trigger Sync-Reset)
Note: When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video. IK-TF7(E) Page 29 Negative polarity mode Positive polarity mode... -
Page 30: ( 5 ) Rr (Reset Restart)
External VD IN V reset About 1H (Internal VD) Exposure period VIDEO OUT VIDEO INDEX External VD interval: more than 1 frame IK-TF7(E) Page 30 Exposure period 1 frame 2004.03.24, 0:59 PM V reset About 1H Exposure period 1 frame... -
Page 31: Partial Scanning
1/90s (258H):when 90fps is selected ( 3 ) When Partial Scanning Mode is ON Video output Blanking interval Mode Total A 60fps 90fps IK-TF7(E) Page 31 Frame image Video interval Blanking interval Video period C Blanking interval B Video interval C Blanking interval D 2004.03.24, 0:59 PM... -
Page 32: Input Output Signal Specificatoins
In the reset-restart/external trigger mode: Continuously with the HD period of 43.05 s. VD (reset) is at an arbitrary timing with the phase of HD being within the standard of the above diagram. IK-TF7(E) Page 32 ( 4 ) HD Input Specifications 4.5V... -
Page 33: Ccd Output Waveform Timing Chart
Optical black pixels portion Video Vertical blanking interval 28H output signal (1205 s) (Representative values) IK-TF7(E) Page 33 One horizontal scan interval 1270 clk (43.05 s) 164 clk 29 clk 3 clk 5 clk Dummy stop interval pixels Total effective pixels 1034 clk... -
Page 34: Specifications
SYNC : HD, VD, INDEX : Interface Serial data interface (RS-232C) Optional parts EXC-TF05B (RGB cable), etc IK-TF7(E) Page 34 (except for protruded portion) unbalanced, D sub 15 pin connector 2 – 5 V(p-p) Negative 2.0V 1 V(p-p) 75 unbalanced +0.5... -
Page 35: External Appearance Diagram
11. EXTERNAL APPEARANCE DIAGRAM 2-M3 Depth 3 12. BEFORE MAKING A SERVICE CALL Symptom No image Poor color IK-TF7(E) Page 35 4-M3 Depth 3 4-M2 Depth 3 Items to be checked • Is the power supplied correctly? • Is the lens iris adjusted correctly? •... - Page 36 [2] You must schedule service within thirty days after you discover a defective product or part. [3] All warranty servicing of this product must be made by a Toshiba ISD Authorized Service Provider. [4] The warranty extends to defects in material or workmanship as limited above, and not to any products or parts that have been lost or discarded by user.