Advertisement
3.4 Mounting the robot console
Follow the mounting guidelines of the robot manual.
Mount the robot console in the right position. Start by mounting 2x M8x20 in the
top-middle and leave a gap if 10mm. This will allow the robot console to slide into
position due to the two keyhole-shaped holes. Fasten all 8x M8x20.
Revision: 2021-11
EasyRobotics ApS
ProFeeder X, X-XL, Compact & Compact-XL User-Manual
Page 6 of 26
Advertisement
Need help?
Do you have a question about the EASYDESK and is the answer not in the manual?
Questions and answers