Introduction/Intended Use; Safety Notice - EasyRobotics EASYDESK User Manual

1 Introduction/intended use

EasyDesk is designed for easy feeding of CNC machines and other workplaces and
machines. Can be mounted with a fully installed cobot or small-medium sized
industrial robot..

2 Safety notice

2.1 Introduction
The intension of this manual is to give a guideline of mounting a cobot at the
EasyDesk and this is not valid as a CE marking of the robot cell.
A risk assessment most be full filled after the full installation is concluded. Including
the robot, gripper and other equipment and installations at the workspace.
EasyDesk must be bolted to the floor when performing working operation. The local
governmental safety rules and legislation must be followed when installing and
operating with a robot on the EasyDesk.
2.2 Legend
This symbol means danger to life or risk of personal injury or damage to the
equipment. Read carefully. Caution is required!
Revision: 2021-11
EasyRobotics ApS ProFeeder X, X-XL, Compact & Compact-XL User-Manual Page 2 of 26