Input Output Signal Specifications - Toshiba IK-52N Operating Manual

5. Input Output Signal Specifications

HD/VD Output Amplitude Specifications
HD
VD
The amplitude level is the representative value
when terminated with 10k . Output is enabled
when the rear panel HD/VD signal input/output
switch is set to the INT side.
VIDEO INDEX Output Specifications
262.5H
The amplitude level is the representative value
when terminated with 10k .
VD Input Specifications
5H to 21H
* Input impedance: 75 or 1k or greater
* Input amplitude 2.0 to 5.0 Vp-p (75 termina-
tion ON or OFF)
* Voltage and pulse width were measured at
pin 7 of the 12-pin connector located on the
rear panel.
14
HD Input Specifications
4.5V
0V
4.5V
* Input impedance: 75 or 10k or greater
* Input amplitude 2.0 to 5.0 Vp-p (75 termina-
0V
tion ON or OFF)
* Voltage and pulse width were measured at pin
6 of the 12-pin connector located on the rear
panel.
Trigger Pulse Specifications
4.5V
0V
* Input impedance: 10k or greater
* Voltage and pulse width were measured at
pin 11 of the 12-pin connector located on the
2.0 to 5.0Vp-p
rear panel.
4.0 s to 10.0 s
(Positive polarity mode)
More than 2 s
(Negative polarity mode)
More than 2 s
2.0 to 5.0Vp-p
2 to 5.0V
0 to 0.4V
2 to 5.0V
0 to 0.4V