Power Failure During Timer Operation - Toshiba RAS-10SAV-A Service Manual

9-4. Remote control
9-4-1. Remote control and its functions
1 1 1 1
1
Infrared signal emitter
2
Start/Stop button
3 Mode select button (MODE)
4 Temperature button (TEMP)
5 Fan speed button (FAN
6 Swing louver button (SWING)
7 Set louver button (FIX)
8 On timer button (ON)
Off timer button (OFF)
9
18
10
Sleep timer button (SLEEP)
19 11
Setup button (SET)
20 12
Clear button (CLR)
13
Memory and Preset button (PRESET)
14
One Touch button (ONE-TOUCH)
15
High power button (Hi-POWER)
16
Economy button (ECO)
17
Quiet button (QUIET)
18
Comfort sleep button (COMFORT SLEEP)
19
Filter reset button (FILTER)
20
Clock Reset button (CLOCK)
21
Check button (CHK)
9-4-2. Operation of remote control
1. ONE-TOUCH
Press the "ONE-TOUCH" button for fully automated operation that is customised to the typical consumer
preferences in your region of the world. The coutomised settings control temperature air flow strength, air flow
direction and other settings to provide you alternate contact with "ONE-TOUCH" OF THE BUTTON. If you
prefer other settings you can select from the many other operation functions of your Toshiba unit
Press ONE-TOUCH : Start the operaton.
2. AUTOMATIC OPERATION
To automatically select cooling, heating, or fan only operation.
1. Press MODE : Select A.
2. Press MODE : Select A.
3. COOLING / HEATING / FAN ONLY OPERATION
To automatically select cooling, heating, or fan only operation.
1. Press MODE : Select Cool
2. Press MODE : Set the desired temperature.
Cooling: Min. 17°C, Heating : Max, 30°C, Fan Only: No temperature indication
3. Press FAN : Select AUTO, LOW , LOW+
HIGH .
, Heat , or Fan only .
, MED
43
FILE NO. SVM-07008
, MED+ , or