Before First Use - Singer Perfect Finish II Instruction Manual

Before First Use

• Remove any protective films or stickers from the soleplate and the iron.
• Read all safety and operating instructions.
• Fill the water tank as described in the "Filling the Water Tank" section.
• To turn the iron on, plug the iron into a grounded electrical outlet. The green
Temperature Indicator Light will glow.
• Consult the garment's label for temperature instructions or use the chart on
page 6 of this manual for recommendations.
• To begin heating, turn the Temperature Control Dial clockwise to the
appropriate temperature (, , or ). The Temperature Indicator Light
will turn red when heating.
• When the selected temperature is reached, the Temperature Indicator Light
will turn green.
• Move the Variable Steam Control Dial to the maximum position
• On an ironing board or protected surface, iron an old towel or other heavy
material until the water tank is empty and no more steam is produced.
• It is normal for a small amount of smoke and a light odor to be produced the
first time the iron is used. This will disappear quickly.
• Particles may emit from the iron the first time it is used. They are not harmful
and should disappear after the iron has been used as described above.
4
OPERATING INSTRUCTIONS
.