Installation; General - Voltech AT3600 User Manual

2. I
NSTALLATION
2.1. G
ENERAL
1. Switch off the AT3600/AT5600 and remove any test fixtures.
2. Read and adhere to the safety information section of this manual.
3. Fit the AC Interface Fixture to the rear of the AT3600/AT5600's top platter and twist down the locking
knobs.
4. Connect the lead 'To AT Peripheral Port' to the peripheral port of the AT3600/AT5600 at the rear of
the tester.
5. Fit the desired current CT. Normally, you can just fit the supplied Voltech CT10-20 current
transformer. For details, see the technical information section of this user manual.
V AC I U
OLTECH NTERFACE SER
M 98-072 3
ANUAL ISS
18
PAGE