Tascam CD-500/500B Release Notes

Updates
Always use the most recent firmware for this device.
Please visit the TASCAM web site at http://tascam.com/ to
check for the latest firmware.
Maintenance items
V1.11 fixes
•
When the fade out time was set, it did not function
(pause) [JOG] button on the
properly when the
π
PAUSE button on the remote control was
unit or the
π
pushed. This has been fixed.
•
If the resume and power on play functions were ON,
the resume function did not work when the power was
turned ON. This has been fixed.
•
When playing back tracks with the flash start function,
playback could become unstable depending on the
condition of the audio CD. This has been fixed.
V1.10 fixes
•
The precision of playback time display has been
improved for MP3/WAV files (32/48 kHz).
• CALL button in program mode to
If you pressed the
start playback from a paused state, playback started
from the first track in the saved program. This has been
changed so that now playback starts from the pause
point.
•
Pressing the SKIP button when stopped in
Â
program mode started playback from the first track
in the saved program. This has been changed so that
now playback starts from the final track in the saved
program.
Confirmation of firmware version
Confirm the firmware version of your CD-500/500B before
conducting a firmware update.
1 Turn the unit's power ON.
2 Enter menu mode, and select the
menu item. For details, see the "Menu operation
basics" section of the "4 – Menu" chapter in the CD-
500/500B Owner's Manual.
D01153220B
CD-500/500B
3 Press the PITCH [MENU] knob on the main unit or
Firmware update procedures
Prepare a completely blank CD-R or CD-RW and a
computer that can create a data CD.
Be very careful not to cut the power to the unit during
firmware updating. If the power should be interrupted
during firmware updating, the unit could become
unstartable or otherwise damaged.
1 Download the file
2 Create a data CD for updating the unit
3 Update the firmware
21 INFO
Release Notes
the ENTER button on the remote control to show
the system firmware version on the display.
Version
If the firmware version shown here is the same or
newer than the firmware version that you planned to
update to, then there is no need to update it.
CAUTION
Download the latest firmware from the TASCAM
website (http://tascam.com/). Uncompress the
downloaded file if it is in a ZIP format or otherwise
compressed.
Write the downloaded firmware files to the disc.
(V1.11, for example, uses 8 firmware files: C5B00111.
upd, C5C00111.upd, C5D00111.upd, C5M00111.
upd, C5R00111.upd, C5R10111.upd, C5S00111.upd
and C5S10111.upd.) Use ISO 9660 Level 1 (MS-DOS-
compatible) Disc At Once format to write the CD-R or
CD-RW.
1) Turn the unit's power on.
2) Confirm that
no disc
While pressing and holding both the SEARCH
[A.CUE] and SEARCH
the unit, press the EJECT button.
3) Confirm that
UPDATE IN
display, and insert the update data CD.
Build number
appears on the display.
Ô
[A.READY] buttons on

appears on the
1
TASCAM CD-500/500B