Table of Contents
Advertisement
* Power supply
65C-0i: 220-240V 10A
55C-0i: 220-240V 9A
45C-0i: 220-240V 8A
Note:
• This manual provides the illustrations of the
accessory parts and machine that may be
slightly different in shape from yours. In that
case, instead of the illustrations, use the ap-
pearance of your machine to follow the instal-
lation procedure.
This does not cause any significant change or
problem with the procedure.
• If none of the later steps instruct you to use the
parts including screw and cover that you re-
moved following the instructions described in
this manual, discard them.
Installation Manual
6. Installing the main body and the Paper
Feed Cabinet
(1) Take the main body and the Paper Feed Cabi-
net out from its packaging.
Main body mass: approx. 100 kg (220-7/16
lb)
• Make available collective manpower of
an appropriate size for transporting the
main body.
• When holding the transportation han-
dles, be careful not to catch your fin-
gers in the machine.
Note:
Remove the main body, holding it by the handles
on the right and left sides as shown in the illustra-
tion and keeping it level.
(2) Refer to the installation manual for the Paper
Feed Cabinet and follow the "Installation Pro-
cedures."
Note:
When installing either the Heater HT-509, the
Transformer kit TK-101, or the Power Supply BOX
MK-734 on the Paper Feed Cabinet, install them
at the same time.
E-4
CAUTION
Y119820-3
Advertisement
Table of Contents
