Olivetti d-ColorMF659 Installation Manual page 15

c) Pass the cable through the notch and attach
the rear right cover. (Two screws)
<When using the Paper Feed Cabinet PC-416/
PC-216/PC--116>
a) Remove the rear right cover from the paper
feed cabinet. (Two screws)
b) Cut out the knockout from the rear right cover
using nippers.
Y119820-3
c) Route the network cable through the harness
guide and three wire saddles.
Note:
Leave an appropriate amount of slack in the por-
tion of the cable between the plug and the har-
ness guide in a manner which does not interfere
with the opening and closing of the cover.
Leave an appropriate amount of slack.
d) Pass the cable through the notch and attach
the rear right cover. (Two screws)
E-13
Installation Manual