Using Sleep Mode - Sunwave Tech. SRC-3310/9320 User Manual

Using Sleep Mode

Sleep mode allows the SRC-93 SERIES to send a
command or start a Macro after a specified time delay.
One example is you could use sleep mode to shut off a TV
after you have already fallen asleep.
To use sleep mode:
1. Press and hold the BACKLIGHT
(SLEEP) key for two seconds.
2. Use the arrow keys to specify the
sleep timeout period. (24 hours
maximum)
3. Press OK to confirm.
Select the Device using the device keys
4. Please refer to Macro setup, the
step 6 ~ 13 (on page 43~45) ,
to press the buttons you want the
SRC-93 SERIES to send after when
the sleep timer reaches zero.
5. Press OK when finished.
Note: If you want to cancel the Sleep function:
• Press and hold the BACKLIGHT (SLEEP) key for two
seconds.
• Press Exit to cancel.
39