Sunwave Tech. SRC-3310/9320 User Manual page 22

SRC-93 SERIES User's Manual
Press and hold the SETUP button on the
Touch Screen.
Press each number button (2, 4, 6, 8)
until it disappears.
Use the arrow buttons on the Touch
Screen to select CODE and then press
the OK button.
1. Use the device buttons to select the
device you want to change. You will
see the labels changing in the upper
right hand corner of the screen. (ex.
Press TV button)
There are two ways to program the manufacture codes:
• Manual Entry: Directly enter the code; go to step 2.
• Automatic Search: The SRC-93 SERIES will search known
codes; skip to step 5.
To use manual entry:
Manual Entry
2. Enter the Manufacture code using
the Touch Screen number buttons.
3. Press the POWER button to test the
code. The device you are trying to
control should turn on (or off) as
you press this button. If not, return
to Step 2 and try another code.
18
* Note: See Preprogrammed
Code List as the separately
pages.