Sunwave Tech. SRC-3310/9320 User Manual page 51

Problem
A button of your
existing remote
performs two or
more functions
The LCD screen
turns off.
IR LEARNING
cannot be made
successfully.
Solution
Some remotes issue multiple commands
when a button is held down. Please be
sure to teach different buttons of SRC-93
SERIES for these different commands.
Each button of SRC-93 SERIES can only
learn one command.
The SRC-93 SERIES is preset automatically
to switch the LCD off after the Power
Down time. Just tap the LCD screen or
any button to turn the SRC-93 SERIES
back on again. You can also reset the
Power Down time period. (page 41)
Replace batteries in the SRC-93 SERIES
and the remote you are trying to learn
from.
Keep distance between remotes to
about 2~4 inches.
Do not learn near an incandescent
lamp.
Memory capacity is full (56 keys for each
of 16 models).
The learning process has no errors, but
you still can't control your AV devices:
repeat the learning procedure again. If
you still can't solve the problem, use the
code collection feature and email
codes to Sunwave. (page 24)
Original remote might not be
compatible with learning procedure.
47