Table of Contents
Advertisement
1. Use the device keys to select the
device you want to label.
2. Use the arrow keys to give the device
a new label.
3. Press OK when finished.
Then press EXIT to leave the SETUP
menu.
Changing Touch Screen Layout
The layout edit mode enables you to customize the
SRC-93 SERIES's Touch Screen display to match your
existing remote controls. The following steps show you
how to make the display on the SRC-93 SERIES
correspond to an existing remote.
Use the LAY selection in the SETUP Menu:
Press and hold the SETUP button on the
Touch Screen.
Press each number button (2, 4, 6, 8)
until it disappears.
Use the arrow buttons on the Touch
Screen to select LAY and then press
the OK button.
15
Hide quick links:
Advertisement
Table of Contents
