Controls - Ossila Solar Cell I-V Test System User Manual

Solar Cell I-V Test System (Manual)
9.9

Controls

(I) Measure
Clicking this button will start the measurement using the chosen settings.
•
This button cannot be clicked if the software has not detected the test system.
•
(II) Abort
Stops a measurement that is currently in progress.
•
Ossila.com
Figure 9.12. Characterisation save data format.
Figure 9.13. Stabilised Current Output save data format.
Figure 9.14. Solar Lifetime Measurement save data.
Figure 9.15. Controls for the measurements.
22
User Manual
Ossila Limited © 2022