Chapter 4
4. Select
rule.
5. Delete all or disable all entries if there are any entries already.
6. Click
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC
2 ) Enter wireless client A/B in the Description field.
3 ) Select
4 ) Click
7. The configured filtering rules should be listed as the picture shows below.
Done!
4. 4. 5.
The configuration for each operation mode is almost the same, we take Access Point
mode for example here.
1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
Downloaded from
ManualsNet.com
Allow the stations specified by any enabled entries in the list to access
Add New
and fill in the blank.
Address field.
Enabled
in the Status drop-down list.
Save
and click Back.
Now only client A and client B can access your network.
Wireless Advanced
Wireless
>
Wireless
Advanced.
search engine
Configure the Access Point
as the filtering
36