Beko 978590EI User Manual page 50

1. *Support Service Key
Press this button for 3 seconds to activate
the support service. Detailed information on
the support service is provided in the "Sup-
port Service Feature" section.
2. *Quick Freezing Key
When the quick freezing key is pressed the
quick freezing symbol shall be illuminated
and the quick freezing function shall be ac-
tivated. The freezer compartment temperat-
ure is set to -27 °C. Press the key again to
cancel the function. The quick freezing func-
tion will be automatically cancelled after 48
hours. To freeze a large amount of fresh
food, press the quick freezing key before
placing the food in the freezer compartment.
*Handle Light Function Setting Key
Handle light function might be switched
between open and closed modes by press-
ing the quick freezing key for 3 seconds. In
the closed mode, the handle light is only ac-
tivated when the appliance door is opened
and it goes out after a while after the door is
closed. In the open mode, the handle light is
activated when the appliance door is
opened, the handle light stays on dimly after
a while after the door is closed. The handle
light function is set to the ex-factory closed
mode.
3. Error Condition Indicator
This indicator will be active when your refri-
gerator cannot perform adequate cooling or
in case of any sensor error. "E" will be dis-
played on the freezer compartment temper-
ature indicator and figures such as 1,2,3...
will be displayed on the cooler compartment
temperature indicator. These figures provide
information to the authorized service on the
error that has occurred.
Exclamation mark may be displayed for a
while when you load warm food to the
freezer compartment or keep the door open
for a long period of time. This is not a fault,
this warning will be removed when the food
is cooled down or when any key is pressed.
4. Energy Saving (Display Off) Indicator
Energy saving function is enabled automatic-
ally and the energy saving symbol lights up
when the door of the product is not opened
or closed for some period of time. When the
energy saving function is active, all symbols
on the screen except the energy saving sym-
bol will be turned off. When the energy sav-
ing function is active, if you press any key or
open the door, the energy saving function
will be deactivated and the symbols on the
screen will return to normal. The energy sav-
ing function is a function activated ex-factory
and cannot be cancelled.
5. The Freezer Compartment Temperat-
ure Setting Key
Temperature setting is made for freezer
compartment. Pressing this key will enable
the freezer compartment temperature to be
set at -18,-19,-20,-21,-22,-23,-24 Celsius.
6. *Compartment Conversion Key
Pressing compartment conversion key for 3
seconds, the freezer compartment switches
between cooler, off, and freezer modes.
If it is operated as the cooler compartment,
the temperature of the compartment will be
set as 4 °C. In the off mode, compartment
temperature indicator shall display "- -".
7. *Deodoriser Module Key
Press this key for 3 seconds to activate/de-
activate the deodoriser feature. When the
deodoriser feature is active, the LED on the
respective key is illuminated. When the fea-
ture is active, the deodoriser module will be
operated periodically.
8. *Cooler Compartment Temperature
Setting Key
Allows setting of temperature for cooler
compartment. Pressing this key will enable
the cooler compartment temperature to be
set at 8, 7, 6, 5, 4, 3, 2 and 1 °C.
EN / 50