Ec Declaration Of Conformity - Axminster Engineer Series Original Instructions Manual

Axminster Tool Centre Ltd
Product model: SB-25TC
Name and address of the manufacturer: Axminster Tool Centre Ltd, Unit 10 Weycroft Avenue,
Axminster, Devon EX13 5PH, United Kingdom
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Object of the declaration: SB-25TC Floor Drill Machine
The object of the declaration described above is in conformity with the relevant GB legislation:
Supply of Machinery (Safety) Regulations 2008 as amended.
Electromagnetic Compatibility Regulations 2016 as amended.
References to the relevant harmonised standards used or references to the other technical
specifications in relation to which conformity is declared:
ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment
and risk reduction (ISO 12100:2010)
EN 60204-1:2018 Safety of machinery - Electrical equipment of machines - Part 1: General
requirements (IEC 60204-1:2016, modified)
12717:2001+A1:2009 Safety of machine tools - Drilling machines
Additional information:
Name and address of person authorised to compile the technical file: Axminster Tool Centre
Ltd, Unit 10 Weycroft Avenue, Axminster, Devon EX13 5PH, United Kingdom
The machinery fulfils all relevant provisions of Supply of Machinery (Safety) Regulations 2008
as amended.
Signed for and behalf of: Axminster Tool Centre Ltd;
(place and date of issue): Axminster, Devon, United Kingdom Kingdom, 5th July 2022
(name, function): Andrew Parkhouse, Supply Chain Director
Signature: ........................................................................

EC DECLARATION OF CONFORMITY

'original'