SATO KEIRYOKI PC-3500 Instruction Manual

Instruction Manual
Digital Thermometer Model PC-3500
Thank you for purchasing the PC-3500 Digital Thermometer.
- This product is designed to measure temperature. Do not use it for other
purposes.
- Read this manual thoroughly before using the PC-3500. Keep the manual in
a safe place for future references whenever necessary.
Names and Functions of Components
Front View
Current Temperature
Min. Temperature
Min/Max RESET key

Two-Ways of Hook Usage
For mount For stand
Rear View
Max. Temperature
Sensor Jack
Protective Cap
Cord (3m)
External sensor
Cord Attachment
How to Use
Please have the unit adapt to the measurement environment for at least 30
minutes before using.
1. Displaying the Current Temperature
 When the external probe is not connected, temperature detected by the
internal sensor is displayed
 When the external probe is connected, temperature detected by the external
sensor is automatically displayed.
2. Displaying the Min/Max Temperatures
Min. and Max temperatures are displayed all the time.
Hook
The Min/Max memory can be started by the following procedures.
Set or replace the battery

Press the RESET key (Previous Min/Max temperatures will be reset.)

Battery Lid
Note: The Min/Max memory would be kept even if the external probe is
removed or connected. Press the RESET key to clear the previous data
Use of internal sensor (external probe is not connected)
(1)
The main unit can be used in places where the temperature is between
-5˚C and 50˚C. Do not put it in lower than -5˚C state. Make sure to
secure the protective cap into the sensor jack at that time.
(2) Use of external probe
Connect the external probe to the sensor jack of the main unit.
Note: The probe cord is delicately made. Carefully handle it not to break the
wire.