Battery - Gio Electric ITALIA-MK Owner's Manual

Battery

As mentioned before the batteries of your scooter ship disconnected. You will need to
connect the batteries correctly before your first use and after any time they are
removed. Begin by opening the seat and removing the strap that holds the top battery
pack in place (a). Carefully remove the upper battery pack to allow access to the lower
battery pack. Connect the wire that directly extends from the upper pack and plug it into
the bottom pack (b).
Once BOTH batteries are connected together, connect the installed charging
connection wire (d), installed in the underseat compartment, into the input on the upper
battery pack (c). Ensure all connections are fully inserted, close the seat compartment
and connect the charger to the charging port to charge your scooter as previously
instructed.
⚠
Do not connect the charger until BOTH battery packs are connected to each other.
Connecting the charger to a single battery pack will overload and damage the battery
pack.
A video of the installation can also be found online at https://youtu.be/oHeXxIp05C8.
12