Braking; Lights And Turn Signals; Lcd Display - Gio Electric ITALIA-MK Owner's Manual

Braking

Brakes are applied by squeezing the levers that are located on both sides of the
handlebars. Please take extra care to balance between the brakes in slippery or wet
conditions. It is recommended to use rear brakes first while going down or uphill.
Brake cut out switches integrated into both brake levers will shut off the power to the
motor whenever either front or rear brakes applied
Lights and turn signal
The main headlight switch is located on the right handle grip. It has 3 labeled positions:
Left - labeled ( ☼ )
Center - labeled (>DⱭ<)
Right - labeled ( ○ )
Headlights also have a switch to set their strength, toggle the switch on the left
handlebar between the low and high beam settings.
Turn signals are operated with the 3 position switch on the left handlebar. Slide the
switch to the left or the right to activate the turn signals in that direction and return the
switch to the center position to deactivate the signal.

LCD Display

The LCD screen is set into the center of the handlebars and current speed, battery life
and distance traveled.
Please note that at this time the Italia-MK only has speeds/distances in metric and
the final version of the display may vary slightly
6
All lights including headlight ON
Signal & rear lights only
All lights OFF