Table of Contents
Advertisement
5 Installation
5.1 Safety instructions
Heat production during appliance
operation
Risk of fire
• Make sure that the cabinet material is
heat resistant.
• Check that the cabinet has the required
slots.
Veneers, adhesives or plastic coatings on
adjacent furniture should be temperature-
resistant (>90°C), otherwise they might
warp over time.
The minimum clearance between a
ventilation hood and the cooking
surface must be at least the
distance indicated in the ventilation
hood installation instructions.
The minimum clearances must also be
respected for the edges of the hob on the
back as indicated in the mounting
illustrations.
Installation
5.2 Section cut from the countertop
The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (>90°C).
Create an opening with the dimensions
shown in the figure in the countertop of the
piece of furniture.
L (cm)
60
90
A (mm)
min 150 min 460 min 750 20 - 60
*If there is a piece of furniture above the hob. In
case of hood, refer to the values on the
dedicated manual.
X (mm)
555 - 560
839÷844
B (mm) C (mm)* D (mm)
Y (mm)
478 - 482
478 - 482
E (mm)
min 50
57
Advertisement
Table of Contents
